Full System Cleaning in Cumming, GA

Every visit starts with

Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents

Worth knowing

That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Full System Cleaning in Cumming, GA

Full system cleaning is a complete cleaning of every air-carrying component in your home: supply ducts, return ducts, the air handler cabinet, blower assembly, evaporator coil, and all registers and grilles. In Cumming, a standard single-family home with 12 to 20 duct runs typically takes three to four hours from camera inspection to final photo record. Every job at CleanRun Air Duct Cleaning Cumming starts with a written price before a single panel comes off – no callbacks, no revised figures after the truck is already in your driveway.

If you’ve been reading about duct cleaning and landed here wondering what separates a real cleaning from a shop-vac visit with a coupon attached, you’re asking the right question. Most $79 specials clean two or three accessible runs, blow debris toward the air handler, and leave-nothing like our thorough Air Duct Cleaning services. A full system cleaning addresses every component that touches conditioned air – because contamination at the coil or blower wheel re-distributes itself the moment the system runs, regardless of how clean the duct runs are.

Full system cleaning is the primary scope under our Air Duct Cleaning in Cumming service, and it’s the scope we recommend whenever someone hasn’t had documented cleaning in the past four to five years, has recently completed a renovation, or has visible evidence of debris at the registers. If you’d like a written price before committing to anything, call us at (678) 693-5322 – a live person answers, and the quote goes to you in writing.

When You Need Full System Cleaning

• You’re in a Cumming home built between 2000 and 2015 and have never had documented cleaning. Forsyth County saw significant residential construction during that period, and many of those homes are now fifteen to twenty years into their first duct system. Construction debris – drywall dust, insulation fibers, adhesive particulate – compacts over time at elbows and plenums. The plenum is the central distribution box that connects the air handler to your main duct runs; debris there spreads into every branch line every time the system cycles.
• You’ve recently finished a renovation, even a “minor” one. Sanding, cutting, or demo work anywhere near a return register pulls particulate directly into the system. We regularly photograph renovation debris at the first elbow of return runs in neighborhoods like South Forsyth and the areas near Polo Golf and Country Club, where kitchen and bath remodels are common in homes that are now ten-plus years old.
• Your HVAC system short-cycles or your energy bills have crept up without a clear cause. A debris-coated evaporator coil reduces heat-transfer efficiency. Georgia summers are hard on systems; Cumming averages around 90 days above 90°F, and a fouled coil in that heat load works measurably harder to hit setpoint.
• Visible dust accumulates at registers within days of cleaning them. That’s a system-level signal, not a housekeeping problem. If the inside of your supply registers shows a felt-like buildup at the diffuser louvers, the source is upstream – at the blower or deeper in the duct run.
• You’ve moved into a resale home and have no documentation of prior cleaning. Prior owner records are rarely transferable, and a pre-inspection camera pass almost always finds something the listing photos didn’t mention. We’ve opened systems in newer Cumming subdivisions – Windermere, Traditions of Braselton, Sharon Springs – and found pet dander, rodent evidence, and construction debris coexisting in the same duct run.
• A household member has unexplained respiratory symptoms or allergy flares that don’t track with outdoor pollen counts. Forsyth County’s pollen season is real and long, but if symptoms persist indoors after pollen counts drop, the duct system is worth examining. We photograph what we find before recommending any additional scope.

Our Full System Cleaning Process

1. Written scope and price, delivered before work begins.
   A CleanRun technician walks the system with you – air handler location, number of supply and return runs, register count, system age and configuration. The written price is based on what’s actually in your home, not a per-vent formula applied sight-unseen. This is Haven Standard Clause 1: you see the number before a single access panel comes off, and that number doesn’t change unless you add scope.
2. Pre-cleaning camera inspection with documented photo record.
   We run a flexible camera into every accessible duct run and photograph the interior before cleaning starts. What the camera finds – debris depth, particulate type, any evidence of moisture or biological growth – becomes part of your job record. If there’s nothing significant to clean, we tell you that in writing. This practice has been standard on every CleanRun job since 2013.
3. Negative-pressure extraction setup.
   Negative-pressure extraction means we seal the system and use a high-volume vacuum to pull air through the ductwork from a central collection point, rather than pushing debris around. Our Nikro and Abatement Technologies equipment is sized for residential systems in Cumming, where duct configurations often include both flex duct and rigid metal runs connected at a shared plenum. The vacuum runs continuously during the agitation phase so that dislodged debris moves toward the collection unit rather than deeper into the system.
4. Mechanical agitation of every duct run.
   Agitation is what actually breaks contamination loose from duct surfaces. We use Rotobrush rotary brush systems for accessible rigid runs and air-whip tools for flex sections. Each supply and return run is worked from the register back toward the plenum while negative pressure is active. This is the step that a $79 coupon company skips – agitation requires time per run and equipment that costs more than the coupon covers.
5. Air handler cabinet, blower wheel, and evaporator coil cleaning.
   The air handler is cleaned last, after duct debris has been collected, so that loosened material from the air handler doesn’t re-contaminate cleaned runs. Blower wheel cleaning removes the compacted debris that accumulates in the wheel fins over years of operation – a dirty blower wheel reduces airflow measurably and is a common source of the musty odor homeowners attribute to the ducts. Evaporator coil cleaning restores heat-transfer surface area without damaging the coil fins.
6. Post-cleaning camera pass and final photo record delivered to you.
   Every run is re-photographed after cleaning, with before and after images matched by duct run number in your job record. The photo record is a standard deliverable on every CleanRun job – not an upgrade, not something you request. The 365-Day Done Right Promise applies from the day that record is delivered: if the work isn’t right, we make it right, in writing, with no manager-approval layer between you and a resolution.

Before

After

Full System Cleaning Pricing in Cumming

Full system cleaning in Cumming typically falls between $349 and $749 for a standard single-family home. That range reflects real variation – system size, configuration, and condition all move the number. Here’s what actually drives cost in this market:

• Duct run count: Most Cumming homes in the 2,000 to 3,500 square foot range have 14 to 22 supply and return runs. Homes in larger subdivisions like Windermere or near the Polo Golf community often have zoned systems with additional return plenums, which adds access points and time.
• System configuration: Single-story homes with attic ductwork are generally more accessible than two-story homes where duct runs pass through interior walls or drop ceilings. Accessibility affects labor time directly.
• Pre-existing condition: A system that hasn’t been cleaned in ten or more years – common in Cumming resale homes from the early 2000s construction wave – may require a longer agitation pass per run. The camera tells us before we price it, not after.
• Add-on scope: If the camera finds evidence of biological growth, duct damage, or disconnected sections, we photograph it and quote the additional work separately. You decide before any additional work starts.

Every written quote includes the full system scope – duct runs, air handler cabinet, blower wheel, evaporator coil, and the documented photo record. Air handler and coil cleaning are not add-ons here; splitting them out and charging separately is a common tactic elsewhere, and it’s not how CleanRun prices work.

If you have a written estimate from another company, CleanRun will put its own written number next to it at no cost. Call (678) 693-5322 for a written price – the estimate is free, the person who answers is live, and the number you get is the number on the invoice.

FAQs – Full System Cleaning

How long does a full system cleaning take in a typical Cumming home?

A full system cleaning in a standard Cumming home – 2,000 to 3,500 square feet, one air handler, 14 to 20 duct runs – typically takes three to four hours on-site. Larger homes, multi-zone systems, or systems with significant debris buildup may run four to five hours. The camera inspection happens at the start, which means if the system is cleaner than expected, we tell you that before the agitation phase begins. Call (678) 693-5322 if you want a time estimate specific to your system – we’ll ask the right questions before we give you a number.

Is full system cleaning different from a standard duct cleaning?

Full system cleaning covers every air-carrying component: all supply runs, all return runs, the air handler cabinet, the blower wheel, and the evaporator coil, plus all registers and grilles. A standard duct cleaning – particularly from a coupon-based provider – typically means a vacuum applied to accessible registers and sometimes the main trunk line. The difference matters because debris at the blower wheel or evaporator coil re-distributes into cleaned runs the moment the system restarts. Cleaning ducts without cleaning the air handler is like mopping the floor with a dirty mop.

How much does full system cleaning cost in Cumming, GA?

Full system cleaning in Cumming typically costs between $349 and $749, depending on home size, system configuration, and condition. CleanRun provides a written price before any work begins – Haven Standard Clause 1 – so the number you see before the job starts is the number on the invoice. There are no mid-job revisions unless you add scope, and any additional scope is photographed, explained, and quoted in writing before it starts. Call (678) 693-5322 for a written estimate; it’s free and takes about five minutes.

How often should I have a full system cleaning done in a Cumming home?

For most Cumming homes, Residential Duct Cleaning every four to five years is a reasonable baseline. Homes with pets, recent renovation work, or a household member with respiratory sensitivities may benefit from a three-year cycle. The camera inspection at the start of each visit gives you an objective look at actual condition rather than a time-based assumption – if the system is genuinely clean at the four-year mark, we document that and don’t recommend a service you don’t need. Forsyth County’s combination of pollen-heavy springs and the extended cooling season means systems here run a lot of hours annually, which accelerates accumulation compared to lower-use climates.

What the Photo Record Looks Like

Every customer who completes a full system cleaning with CleanRun receives a documented photo record organized by duct run. Before images are taken during the initial camera pass; after images are taken on the same run following agitation and extraction. The two images are matched, labeled by run number and location (supply run 3, northeast bedroom; return plenum, main floor; and so on), and delivered as part of your standard job record.

This isn’t a marketing asset – it’s a service record. If a run shows biological growth, physical damage, or a disconnected section, the before image documents it. If additional work is recommended on a future visit, the photo record from this job becomes the baseline comparison. That documented continuity is part of what the 365-Day Done Right Promise is built on: accountability requires a paper trail, and CleanRun creates one on every job, in every Cumming home we’ve worked in since 2013.

Tomas Reyes has operated CleanRun under this standard since the company’s first job. The photo record isn’t optional, and it isn’t an upgrade tier – it’s the minimum acceptable deliverable on every visit, across all 52,000-plus homes CleanRun has served.

The H.A.V.E.N. Standard and What It Means for Your Job

Every CleanRun job operates under the H.A.V.E.N. Standard, which is the internal operating protocol that governs how technicians are vetted, how prices are quoted, how work is documented, and how post-job accountability works. For a full system cleaning in Cumming, the clauses that matter most are:

• Haven Standard Clause 1 – Written Upfront Price: The price is written before work begins. There is no “call for a quote” at CleanRun. The number on the estimate is the number on the invoice unless you add scope, and added scope requires your written approval before it starts.
• Haven Standard Clause 3 – Verified Crews: Technicians are background-checked, uniformed, and identified by name before arrival. You know who is coming into your home before the truck pulls up.
• 365-Day Done Right Promise: If the work isn’t right after we leave, we make it right. This applies for a full year from the job date and is backed in writing on every invoice – not as a policy that requires manager approval, but as a written commitment that travels with your job record.

For homeowners in Cumming who research before they contact, the H.A.V.E.N. Standard exists to make CleanRun’s commitments verifiable rather than promotional. You can ask to see the written guarantee before agreeing to a job. That’s the point.

Key Takeaways

• Full system cleaning in Cumming covers every air-carrying component – not just accessible duct runs.
• Typical price range is $349 to $749, written before work starts, with no mid-job changes unless you approve added scope.
• Every job includes a before-and-after photo record of every duct run, delivered as a standard deliverable.
• The 365-Day Done Right Promise applies for a full year from the job date, in writing.
• CleanRun has served Cumming and Forsyth County homes since 2013 – over 52,000 jobs, all with written pricing and documented photo records.
• Call (678) 693-5322 to get a written estimate – free, no obligation, answered by a live person.

To learn more about what full system cleaning falls under and how CleanRun approaches the broader service, visit our main Air Duct Cleaning in Cumming page. And if you’d like to see how CleanRun compares to a competitor’s written estimate, bring it – we’ll put our number next to it at no cost.

Call (678) 693-5322 to schedule a written estimate for full system cleaning in Cumming. The estimate is free, the price is written before anyone touches your system, and the photo record is included when the job is done.

Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Cumming, serving Cumming.