Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Repair & Sealing Across Milton
Duct repair and sealing in Milton, GA typically costs $280-$680 per HVAC zone for standard flex or metal duct repairs, and $180-$420 for mastic sealing of accessible trunk lines and joints. Most Milton homes need two to four zones addressed. Our crews are dispatched from our Atlanta office and carry the equipment to photograph, seal, and repair ductwork on the same visit. Call (678) 693-5322 for a written estimate before any work starts.
We know Milton’s homes. The estate lots along Birmingham Road and Hopewell Road, the multi-zone systems in Crabapple, the walk-out basements in the hilly terrain off Freemanville Road. These aren’t 1,500-square-foot tract houses with a single air handler in the attic. They’re 4,000-7,000+ square-foot properties with three, four, sometimes five HVAC zones, hundreds of linear feet of ductwork, and mechanical rooms tucked into crawl spaces or finished basements where humidity collects and flex runs get crushed. Our Duct Repair & Sealing team prices every job per system, not per house, because that’s the only honest way to scope work in this market.
Why CleanRun Air Duct Cleaning Cumming Is Milton’s Preferred Duct Repair & Sealing Company
We’ve served Milton since our founding in 2013, and the pattern is consistent: homeowners here research before they call. They want written prices, verifiable credentials, and proof the work happened. That’s why we publish our license number, name our equipment brands, and deliver a Documented Photo Record of every duct run - before and after - on every single visit. No exceptions.
Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. The 365-Day Done Right Promise is written on every job, not buried in a policy manual. If the repair fails, we make it right. Period.
We also offer a Free Second Opinion on any written estimate from a competitor. Bring us another company’s quote; we’ll put our number next to it in writing. No pressure, no performance. Just a documented comparison.
Calls are answered by a live person, 24/7. Scheduling is coordinated from our Atlanta office, and crews serve Milton locally with the parts and materials to complete most repairs in a single visit.
Our Duct Repair & Sealing Services in Milton
Duct Sealing
Milton’s large homes lose conditioned air through gaps at collar connections, plenum joints, and register boots at rates that smaller systems simply don’t match. A 6,000-square-foot home with four zones might have 200+ individual connection points. We seal accessible joints with mastic sealant and mechanical fasteners, then pressure-test to verify the seal. Every sealed joint is photographed. Typical range in Milton: $180-$420 per zone depending on accessibility and linear footage.
Flex Duct Repair
Flex duct runs to bonus rooms over garages - common in Milton’s 1995-2015 estate builds - sag, get crushed by storage, or disconnect at collars. The camera shows the damage before we cut access. We replace damaged sections with new flex duct, support it properly to prevent future sag, and seal all connections with mastic. Typical range: $240-$580 per repair location, including photo documentation.
Metal Duct Repair
Older metal trunk lines in Milton homes develop corrosion at seams, especially in crawl-space mechanical rooms where North Fulton humidity collects. We cut out damaged sections, fabricate replacement duct from galvanized steel, and seal with mastic and foil tape rated for HVAC use. Typical range: $320-$680 per repair section.
Duct Insulation
Walk-out basements and crawl-space mechanical rooms are common in Milton’s hilly, forested terrain. Uninsulated or degraded duct insulation in these spaces allows condensation to form on cold duct surfaces in summer, degrading the metal or flex interior and creating conditions for mold growth. We install new fiberglass duct insulation with vapor barrier, sealed at all seams. Typical range: $280-$560 per zone.
Mastic Sealant Application
Mastic is the standard for durable duct sealing - a thick, fiber-reinforced compound that remains flexible after curing. We apply it to all accessible joints, collars, and seams after repair work is complete. It’s slower than tape-only methods and messier. It also lasts. On Milton’s multi-system homes, we consider mastic non-negotiable at the air handler connection and any repaired section.
Air Leak Repair
Leaks at the plenum, around filter racks, and at disconnected return ducts pull unconditioned attic or crawl-space air directly into the system. In Milton’s pollen-heavy environment, those leaks also pull in oak and pine particulate that bypasses the filter entirely. We locate leaks with smoke testing and camera inspection, then repair and seal. Documented. Photographed. Written into the scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Milton
Our equipment roster includes Rotobrush rotary brush systems for mechanical agitation inside duct runs, Nikro negative-air machines for controlled debris extraction, and Abatement Technologies HEPA filtration for containment during repair work. We don’t ask Milton homeowners to trust marketing claims about “professional-grade” equipment they can’t verify. These are trade-recognized brands with published specifications, and we name them so you can look them up independently before agreeing to a price.
Common Duct Repair & Sealing Problems We See in Milton Homes
- Crushed flex runs to bonus rooms. The long flex duct serving bonus rooms over garages in Milton’s estate homes often gets compressed by stored items or improper support. The homeowner notices the room never holds temperature. The camera shows a flattened section 12 feet from the register.
- Disconnected collars at multi-zone air handlers. With three or four air handlers in a single home, vibration and thermal cycling loosen collar connections over time. We find supply or return ducts blowing conditioned air into the mechanical room instead of the house.
- Condensation in walk-out basement and crawl-space ductwork. Milton’s high summer humidity combined with short-cycling oversized systems creates moisture accumulation on uninsulated or poorly sealed ducts. The result is degraded duct material and, in some cases, visible mold growth at joints.
- Hay particulate and dander infiltration on equestrian properties. Return-air grilles in garage mudrooms or tack-room-adjacent utility spaces along Birmingham Road and Hopewell Road pull contamination past standard filters. Without proper sealing and antimicrobial treatment, that material recirculates through every supply duct in the home.
Pricing for Duct Repair & Sealing in Milton, GA
| Service | Typical Range (Per Zone) |
|---|---|
| Mastic sealing of accessible joints | $180 - $420 |
| Flex duct repair / replacement | $240 - $580 |
| Metal duct repair section | $320 - $680 |
| Duct insulation (with vapor barrier) | $280 - $560 |
| Antimicrobial fogging (enzyme treatment) | $150 - $280 |
These are whole-system ranges for Milton’s market, not per-vent teaser prices. A typical three-zone estate home with standard sealing needs runs $540-$1,260. Homes with equestrian contamination requiring enzyme treatment and fogging add $150-$280 per affected return. We deliver a written price before any work starts, every time, under Haven Standard Clause 1. No exceptions. Estimates are free. Call (678) 693-5322.
What moves the number: accessibility (crawl space vs. finished basement), linear footage of ductwork per zone, number of damaged sections found during camera inspection, and whether antimicrobial treatment is indicated for contamination. We photograph everything and show you before quoting.
We Also Serve Cities Near Milton
Our crews work throughout North Fulton and Forsyth County, including Milton, Cumming, Buford, Suwanee, and Alpharetta. Dispatch and scheduling are coordinated from our Atlanta office. Each city page details local pricing and conditions specific to that market.
Serving Milton, GA - Our Local Coverage Area
We’re based in the Milton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Milton
Because a 6,200-square-foot Milton home with four HVAC zones and hundreds of linear feet of ductwork is not comparable to a 2,400-square-foot home with one zone. Per-system pricing lets us scope the actual linear footage, accessibility, and condition of each zone’s ductwork. It also prevents the bait-and-switch where a low “whole house” quote becomes a much larger invoice once the crew arrives. You’ll get a written price per zone before any panel comes off. Call (678) 693-5322 for an exact quote - estimates are free.
Yes. Return-air grilles in mudrooms or tack-room-adjacent spaces pull hay particulate, horse dander, and mold spores past standard filters and directly into the duct system. We seal the return ductwork more aggressively at all joints, add a secondary filter recommendation if the grille location can’t be moved, and include antimicrobial fogging with enzyme treatment to address the contamination that’s already circulating. Standard residential cleaning in Alpharetta or Roswell wouldn’t include these steps because the contamination profile doesn’t exist there. We document the treatment in your photo record.
Every job concludes with three deliverables: a written scope of work signed before we start, a Documented Photo Record showing the inside of every duct run before and after repair, and a written 365-Day Done Right Promise. The photo record is the critical piece - it shows the crushed flex, the disconnected collar, the sealed joint, the cleaned interior. Without it, you’re trusting a verbal report about work you can’t verify. We’ve delivered this documentation on every job since 2013. It’s standard, not optional.
Milton’s dense oak, loblolly pine, and sweetgum canopy produces some of the heaviest pollen loads in metro Atlanta. When ducts are leaky, that pollen pulls in through gaps at plenums, filter racks, and disconnected returns, bypassing the filter and coating the duct interior. Sealed ducts reduce infiltration significantly. Most Milton homeowners with sealed systems find they need professional attention every 4-6 years; homes with ongoing leaks or equestrian contamination may need more frequent inspection. Call (678) 693-5322 and we’ll assess your system’s condition with a camera.
In most cases, yes. We access trunk lines and air handler connections through the mechanical room itself, through existing access panels, or via small, repairable openings in unfinished areas. For finished basement ceilings in Milton’s walk-out homes, we use existing register boots and return grilles as access points where possible. If a section is truly inaccessible without ceiling intrusion, we photograph the obstruction, show you exactly why, and include any necessary access work in the written price before proceeding. No surprises. Call (678) 693-5322 to schedule a camera inspection.
Ready for a written estimate? Call (678) 693-5322. We’ll answer live, schedule at your convenience, and deliver a documented, per-system price before any work begins.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Milton since 2013.